Outboard Motor Brackets
Max. 35 HP, 10″ Lift, Aluminum . 55-0410
SKU: 550410
- Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions.
- The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts.
- Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight making adjustments a breeze, while the 2”-thick, extra-wide mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance.
- Handles up to 35 HP, 263 lbs. motors with 10″ of travel. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)
Max. 35 HP, 16″ Lift, Aluminum 55-0416
SKU: 550416
- Adjust your trolling or auxiliary motor to four vertical running positions for changing water or load conditions.
- The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts.
- Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight making adjustments a breeze, while the 2”-thick, extra-wide mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance.
- Handles up to 35 HP, 263 lbs. motors with 16″ of travel. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)
Max. 15 HP, 10″ Lift, Aluminum 55-0407AL
SKU: 550407AL
Adjustable outboard motor bracket is designed for 2- and 4-stroke motors up to 15 HP or 132 lbs. Constructed of hard-coat anodized aluminum and hand adjustable with the turn of a knob.
Stainless steel torsion springs counterbalance the motor weight making adjustments a breeze. 10″ of travel and 5 vertical running positions let you fine tune the motor height for optimal performance. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)
Max. 15 HP 4-Stroke & 20 HP 2-Stroke, 11″ Lift, Stainless Steel 55-0408SS
SKU: 550408SS
Adjustable Stainless Steel outboard motor bracket. Works with 4-Stroke motors up to 15hp or 2-Stroke motors up to 20hp, max weight 132lbs. Twist-knob Safety Locks provide increased torque rating while helping secure bracket in place. Built extra-tough and extra-wide for secondary, higher-torque, four-stroke engines. Motor’s weight is counterbalanced by heavy-duty stainless steel torsion springs for easy lifting. The 55-0408SS boasts a 2″ thick, weatherproof and maintenance-free polypropylene mounting board along with aircraft-type stainless steel hardware. Four-position lock bar and 11″ of travel allow for a better range of trim adjustment letting you fine-tune motor height for optimal performance. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)
Rated for long or short shaft engines.
Setback: 8 3/4″ in the up position and 14″ in the down position
Max. 20 HP, 11″ Lift, Aluminum 55-0021
SKU: 550021
- The adjustable outboard motor bracket is designed for motors up to 20HP or 115 lbs max weight.
- Heavy duty, light weight aluminum is designed for fresh water use on both power boats and sail boats.
- Manual operation means no power is required to raise and lower your auxiliary outboard motor.
- Spring loaded (11″ of travel with 5 stops).
- Motor pad is 8.5″ x 10.5″ x 1.75″
- Do not use without Panther safety cable 55-0415— NOT included.
Do not use with 4 stroke engine.
Max. 12 HP, 14″ Lift, Aluminum 55-0012
SKU: 550012
- Same design as the 55-0021.
- This heavy duty, lightweight aluminum bracket is designed for motors up to 12hp or 82lbs max weight
- Spring loaded (14”of travel with 5 stops.)
- Do not use without Panther safety cable 55-0415—NOT included.)
Not to be used with 4 stroke engines.
Max. 10 HP, 14″ Lift, Stainless Steel 55-0010
SKU: 550010
- The Adjustable outboard motor bracket is designed for motors up to 10HP or 80 lbs max weight.
- Stainless steel construction is non-corrosive for saltwater use.
- Designed for use with power or sail boats.
- Manual lifting required to raise and lower your motor (14″ travel)
- Setback in upper position 7 1/2″, lower position 9 1/2″
Motor pad is 8.5″ x 10.5″ x 1.75″
Do not use with 4 stroke engine. Use safety cable.
Swim Platform Outboard Motor Bracket
SKU: 550030
- Adjustable outboard motor bracket designed to mount on most swim platforms.
- Rated for 2- and 4- stroke motors up to 20HP.
- Constructed of black powder coated aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimum prop depth and performance.
- Comes complete with transom support bar for weight support and torque resistance.
- Do NOT use without Panther 55-0415 safety cable – included.
Pontoon Kicker Motor Bracket Kit
SKU: 550065
Our Pontoon Kicker Motor Bracket Kit makes what has long been a difficult installation a breeze. The kit contains the new Adapter Bracket (55-0060) plus the new Swim Platform Bracket (55-0030) with all mounting hardware included. The Adapter Bracket mounts to the pontoon frame rails. Pontoon boats become more popular every year, and we receive many requests for a solution to mount a kicker motor for trolling or backup. Rated for auxiliary motors up to 20 HP.
55-0060 Adapter Bracket Only
Fixed-Mount, 4-Stroke Outboard Motor Bracket
SKU: 550028
- Works with 4- and 2-Stroke motors up to 35hp and 263 lbs max weight (119kg).
- Rugged Polypropylene mounting board (2″ [5cm] thick).
- Includes stainless steel mounting hardware and safety cable. (Do not use without safety cable)
Outboard Safety Cable SS
SKU: 550415
- Braided, stainless steel cable, plastic coated for protection.
- Use with all outboard motor brackets to secure the motor to your boat.
(All Panther 4-stroke brackets come with Panther safety cable.)
