Outboard Motor Brackets

559

Max. 35 HP, 10" Lift, Aluminum . 55-0410

SKU: 550410

  • Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions.
  • The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts.
  • Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight making adjustments a breeze, while the 2”-thick, extra-wide mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance.
  • Handles up to 35 HP, 263 lbs. motors with 10" of travel. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)

 

 

4-Stroke Motor Bracket 55-0416

Max. 35 HP, 16" Lift, Aluminum  55-0416

SKU: 550416

  • Adjust your trolling or auxiliary motor to four vertical running positions for changing water or load conditions.
  • The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts.
  • Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight making adjustments a breeze, while the 2”-thick, extra-wide mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance.
  • Handles up to 35 HP, 263 lbs. motors with 16" of travel. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)

 

 

Lightweight 4-Stroke Motor Bracket 55-0407ALMax. 15 HP, 10" Lift, Aluminum  55-0407AL

SKU: 550407AL

Adjustable outboard motor bracket is designed for 2- and 4-stroke motors up to 15 HP or 132 lbs. Constructed of hard-coat anodized aluminum and hand adjustable with the turn of a knob. Stainless steel torsion springs counterbalance the motor weight making adjustments a breeze. 10" of travel and 5 vertical running positions let you fine tune the motor height for optimal performance. Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.)


 

560Max. 15 HP 4-Stroke & 20 HP 2-Stroke, 11" Lift, Stainless Steel  55-0408SS

SKU: 550408SS

Adjustable Stainless Steel outboard motor bracket. Works with 4-Stroke motors up to 15hp or 2-Stroke motors up to 20hp, max weight 132lbs. Twist-knob Safety Locks provide increased torque rating while helping secure bracket in place. Built extra-tough and extra-wide for secondary, higher-torque, four-stroke engines. Motor's weight is counterbalanced by heavy-duty stainless steel torsion springs for easy lifting. The 55-0408SS boasts a 2" thick, weatherproof and maintenance-free polypropylene mounting board along with aircraft-type stainless steel hardware. Four-position lock bar and 11" of travel allows for better range of trim adjustment letting you fine tune motor height for optimal performance.  Meets ABYC Standards. (Do not use without Panther 55-0415 safety cable—included.) 
Rated for long or short shaft engines.

Setback: 8 3/4" in the up position and 14" in the down position

 

Outboard Motor Bracket Alum. 20hp (2)Max. 20 HP, 11" Lift, Aluminum  55-0021

SKU: 550021 

  • The adjustable outboard motor bracket is designed for motors up to 20HP or 115 lbs max weight.
  • Heavy duty, light weight aluminum is designed for fresh water use on both power boats and sail boats.
  • Manual operation means no power is required to raise and lower your auxiliary outboard motor.
  • Spring loaded (11" of travel with 5 stops).
  • Motor pad is 8.5" x 10.5" x 1.75" 
  • Do not use without Panther safety cable 55-0415— NOT included.


Do not use with 4 stroke engine.

55-0021 Spec Sheet

55-0021 Hole Pattern

Owners Manual


 

Outboard Motor Bracket 12hpMax. 12 HP, 14" Lift, Aluminum  55-0012

SKU: 550012

  • Same design as the 55-0021.
  • This heavy duty, lightweight aluminum bracket is designed for motors up to 12hp or 82lbs max weight
  • Spring loaded (14”of travel with 5 stops.) 
  • Do not use without Panther safety cable 55-0415—NOT included.)

Not to be used with 4 stroke engines.

55-0012 Spec Sheet

55-0012 Hole Pattern

Owners Manual


 

Outboard Motor Bracket SS 10hpMax. 10 HP, 14" Lift, Stainless Steel  55-0010

SKU: 550010

  • The Adjustable outboard motor bracket is designed for motors up to 10HP or 80 lbs max weight.
  • Stainless steel construction is non-corrosive for saltwater use.
  • Designed for use with power or sail boats.
  • Manual lifting required to raise and lower your motor (14" travel) 
  • Setback in upper position 7 1/2", lower position  9 1/2"
    Motor pad is 8.5" x 10.5" x 1.75"


Do not use with 4 stroke engine. Use safety cable. 

55-0010 Spec Sheet

Owners Manual


 

Outboard Motor Bracket SS 20hpMax. 20 HP, 11" Lift, Stainless Steel  55-0020A

SKU: 550020A

  • The adjustable outboard motor bracket is designed for motors up to 20HP or 115 lbs max weight.
  • Stainless steel construction is non-corrosive for saltwater use.
  • Designed for use with power or sail boats. Can be adjusted for use on positive angle transoms.
  • Unit is spring loaded to assist manual lifting (11" of travel with 4 stops).
  • Motor pad is 8.5" x 10.5" x 1.75" 
  • Do not use without Panther safety cable 55-0415—NOT included

 

Do not use with 4 stroke engine.

55-0020A Spec Sheet

Owners Manual


 

Swim Platform Outboard Motor Bracket 1Swim Platform Outboard Motor Bracket

SKU: 550030

  • Adjustable outboard motor bracket designed to mount on most swim platforms.
  • Rated for 2- and 4- stroke motors up to 20HP.
  • Constructed of black powder coated aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimum prop depth and performance.Swim Platform Outboard Motor Bracket 2
  • Comes complete with transom support bar for weight support and torque resistance.
  • Do NOT use without Panther 55-0415 safety cable - included
 

Pontoon Kicker Motor Bracket Kit

SKU: 550065

Screen Shot 2018-08-29 at 12.07.40 PM

Our Pontoon Kicker Motor Bracket Kit makes what has long been a difficult installation a breeze. The kit contains the new Adapter Bracket (55-0060) plus the new Swim Platform Bracket (55-0030) with all mounting hardware included. The Adapter Bracket mounts to the pontoon frame rails. Pontoon boats become more popular every year, and we receive many requests for a solution to mount a kicker motor for trolling or backup. Rated for auxiliary motors up to 20 HP.

 

 

55-0060 Adapter Bracket Only

 

Fixed-Mount, 4-Stroke Outboard Motor BracketFixed-Mount, 4-Stroke Outboard Motor Bracket

SKU: 550028

  • Works with 4- and 2-Stroke motors up to 35hp and 263 lbs max weight (119kg).
  • Rugged Polypropylene mounting board (2" [5cm] thick). 
  • Includes stainless steel mounting hardware and safety cable. (Do not use without safety cable)

55-0028 Spec Sheet

Owners Manual


Fixed-Mount, Outboard Motor BracketFixed-Mount, 2-Stroke Outboard Motor Bracket

SKU: 550024

  • For engines up to 12hp and 85 lbs max weight (39kg).
  • Heavy-duty Stainless Steel.
  • Rugged Polypropylene mounting board (2" [5cm] thick).
  • Includes mounting hardware.
  • recommend using safety cable— not included

55-0024 Spec Sheet

Owners Manual



Outboard Safety Cable SS55-0415_SafetyCable

SKU: 550415

  • Braided, stainless steel cable, plastic coated for protection.
  • Use with all outboard motor brackets to secure the motor to your boat.

(All Panther 4-stroke brackets come with Panther safety cable.)

 

Transom Adaptor 55-0023Transom Adaptor

SKU: 550023

  • For use with the 55-0012 and 55-0021 brackets, so you can easily install and remove your kicker motor bracket within seconds. Above mentioned brackets easily slide into and out of the channel of the transom adaptor.
  • Transom adapter has hole for lock to prevent theft of motor and bracket.
  • Dimensions of plate are 9 1/4" x 7 1/2" x 1 3/4. 
  • Stainless Steel mounting hardware included.